Replacing an Accord Wheel Bearing – EricTheCarGuy

Replacing an Accord Wheel Bearing Ok, here it is finally. A few of you have requested this procedure so here it is. As I said in the video I normally use a different method of removing the hub from the bearing assembly by using a slide hammer. I also normally use a press to reinstall the hub into the new bearing instead of hitting it with a hammer. Life is not perfect and we sometimes have to improvise as I did here. I know a few of you will ask about the size fasteners that I used to hammer the bearing out, I used hardened (8.8) 10×1.25 bolts to do the job. I also promised links to the other videos that relate to this one so here they are. “Oops, Axle Ball Joint Replacement” www.youtube.com and also “How to Replace Honda Captive Rotors” www.youtube.com — Click below and Stay Dirty Visit me at EricTheCarGuy.com ericthecarguy.com Visit EricTheCarGuy Forum www.ericthecarguy.com Visit my Facebook Page: www.facebook.com — Thanks again to all that have subscribed and left such great comments on my videos and my channel, you are the best, I mean it. You know the lineStay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting
Video Rating: 4 / 5

A how to guide on replaceing front wheel bearings. on a 2004 Nissan Maxima. Be sure and let me know if you need any help or any specific videos. I work on alot of different models daily.
Video Rating: 4 / 5

Related Reading:

turnkeyaffiliateswebsites

Buyfave.com